Client List - ZyXEL Communications P870HNU-51B User Manual

The following table describes the labels in this screen.
Table 13 Status > LAN Statistics
LABEL
Interface
Received
Bytes
Pkts
Errs
Drops
Transmitted
Bytes
Pkts
Errs
Drops
Refresh Interval
Set Interval
Stop

4.1.8 Client List

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the Device as a DHCP
server or disable it. When configured as a server, the Device provides the TCP/IP configuration for
the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else
the computer must be manually configured.
Click Status > Client List to open the following screen. The read-only DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address) of all network
clients using the Device's DHCP server.
Figure 14 Status > Client List
P-870HNU-51b User's Guide
DESCRIPTION
This shows the LAN or WLAN interface. eth0~3 represent the physical Ethernet
ports 1~ 4.
This indicates the number of bytes received on this interface.
This indicates the number of transmitted packets on this interface.
This indicates the number of frames with errors received on this interface.
This indicates the number of received packets dropped on this interface.
This indicates the number of bytes transmitted on this interface.
This indicates the number of transmitted packets on this interface.
This indicates the number of frames with errors transmitted on this interface.
This indicates the number of outgoing packets dropped on this interface.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Refresh
Interval field.
Click Stop to stop refreshing statistics.
Chapter 4 Status Screens
83