ZyXEL Communications P870HNU-51B User Manual page 34

Chapter 2 Tutorials
Alternatively, you may log into Device's web configurator, make sure the Enable WPS checkbox is
5
selected and click Apply in the Network > Wireless LAN > WPS Station screen.
Click the Push Button in the Network > Wireless LAN > WPS Station screen.
6
Note: Your Device has a WLAN/WPS button located on its rear panel as well as a WPS
button in its configuration utility. Both buttons have exactly the same function: you
can use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within 120 seconds of pressing the first one.
When the Device is sending the configuration settings to the wireless client, the WLAN/WPS LED
7
blinks orange. This may take up to two minutes. Then the WLAN/WPS LED turns green when the
wireless client is able to communicate with the Device securely.
34
P-870HNU-51b User's Guide