9.1 Overview
This chapter shows you how to enable and configure the Device firewall settings.
The Device firewall is a packet filtering firewall and restricts access based on the source/destination
computer network address of a packet and the type of application.
9.1.1 What You Can Do in this Chapter
• Use the General screen
default action that the firewall takes on packets that do not match any of the firewall rules.
• Use the Rules screen
edit or remove a firewall rule.
9.2 The Firewall General Screen
Click Security > Firewall to display the following screen. Activate the firewall by selecting the
Active Firewall check box as seen in the following screen.
Figure 61 Security > Firewall > General
P-870HNU-51b User's Guide
(Section 9.2 on page
159) to enable firewall on the Device, and set the
(Section 9.3 on page
161) to view the configured firewall rules and add,
9
Firewall
159