ZyXEL Communications P870HNU-51B User Manual page 197

Click QoS > Class Setup to open the following screen.
Figure 101 QoS Class Setup
The following table describes the labels in this screen.
Table 63 QoS Class Setup
LABEL
Add
Order
Active
Class Name
Classification
Criteria
Forward To
DSCP Mark
802.1P Mark
VLAN ID Tag
To Queue
Modify
Apply
P-870HNU-51b User's Guide
DESCRIPTION
Click this button to create a new classifier.
This field displays the index number of the classifier.
Select the check box to enable the classifier.
This is the name of the classifier.
This shows criteria specified in this classifier, for example the interface from
which traffic of this class should come and the source MAC address of traffic
that matches this classifier.
This is the interface through which traffic that matches this classifier is
forwarded out.
This is the DSCP number added to traffic of this classifier.
This is the IEEE 802.1p priority level assigned to traffic of this classifier.
This is the VLAN ID number assigned to traffic of this classifier.
This is the name of the queue in which traffic of this classifier is put.
Click the Edit icon to go to the screen where you can edit the classifier.
Click the Remove icon to delete an existing classifier. Note that subsequent
rules move up by one when you take this action.
Click Apply to save your changes back to the Device.
Chapter 15 Quality of Service (QoS)
197