Page 2
Device Panels PWR/SYS DSL PORT ETHERNET ETHERNET LEDS PORTS RESET WPS/WLAN LED POWER DSL LED ON/OFF INTERNET LED...
Page 3
Overview The P-870HN-51D is a router which combines high-speed VDSL Internet access, a built-in switch and high-speed wireless networking capability. It supports Quality of Service (QoS) that allows time-sensitive services and applications to flow more smoothly. The firewall blocks traffic initiated from the WAN but can be configured to allow incoming traffic from certain IP addresses.
If a screen does not pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually drive D) and navigate to it from there. Hardware Connections Remove the P-870HN-51D’s plastic cover before using it.
Page 5
2. ETHERNET 1~4: Use an Ethernet cable to connect a computer to one of these ports for initial configuration and/or Internet access. 3. Use the power adaptor provided with your P-870HN-51D to connect an appropriate power source to this socket.
You can set up a wireless network using the following methods. Using Wireless Protected Setup (WPS) Press the WPS button on the P-870HN-51D’s rear panel for more than 5 seconds to turn the WPS function on. Follow these steps to add a WPS-enabled device to the wireless network using the WPS/WLAN button.
Set Up a Wireless Network Manually The wireless function on your P-870HN-51D is enabled by default. To add a wireless client to the network, use the settings found in the bottom panel of the P-870HN-51D, as follows: SSID: ZyXEL Security Mode: WPA2-PSK (compatible)
Page 8
WAN connection if the INTERNET LED (light) is off. You may need to enter the username and password provided by your ISP. The P-870HN-51D is a desktop device. Please make sure to place it in a dry and flat surface before using.