ZyXEL Communications P870HNU-51B User Manual page 162

Chapter 9 Firewall
Note: The firewall rules that you configure here take priority over the general firewall
action settings in the General screen.
Figure 63 Security > Firewall > Rules
The following table describes the labels in this screen.
Table 51 Security > Firewall > Rules
LABEL
Incoming/
Outgoing Rules
No.
Active
Name
Interface
Filter Criteria
162
DESCRIPTION
The following fields summarize the rules you have created that apply to traffic
traveling in the selected packet direction.
This is your firewall rule number. The ordering of your rules is important as rules
are applied in turn.
This field displays whether a firewall rule is turned on or not. Select the check box
to enable the rule. Clear the check box to disable the rule.
This displays the name of the rule.
This displays the LAN or WAN interface(s) to which this rule is applied.
This displays the filtering criteria, such as the source or destination IP addresses
and subnet mask to which this rule applies.
P-870HNU-51b User's Guide