ZyXEL Communications P870HNU-51B User Manual page 94

Chapter 5 WAN Setup
Table 19 WAN Configuration: Service Type
LABEL
Enter 802.1P
Priority
Enter 802.1Q
VLAN ID
Enable IPv6 for
this service
Back
Next
5.5.1.3 WAN IP Address and DNS Server
The screen differs by the encapsulation you selected in the previous screen. See
page 107
94
DESCRIPTION
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-
layer frame that contains bits to define class of service.
Type the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this
connection. The greater the number, the higher the priority level.
This field is available when the layer-2 interface is in VLANMUX mode.
Type the VLAN ID number (from 1 to 4094) for traffic through this connection.
This field is available when the PTM interface is in VLANMUX mode.
Select this option to enable IPv6 for this WAN service so that the Device can use
an IPv6 address when sending traffic through this connection.
You can only enable IPv6 for a WAN service that uses the PPPoE or IPoE
encapsulation method over the ATM or PTM interface.
Click this button to return to the previous screen.
Click this button to continue.
for more information.
Section 5.7 on
P-870HNU-51b User's Guide