Table of Contents
Advertisement
Table 5 Navigation Panel Summary
LINK
System
Logs
Tools
Diagnostic
3.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
Right after you log in, the Status screen is displayed. See
information about the Status screen.
3.2.3 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been updated.
P-870HNU-51b User's Guide
TAB
FUNCTION
General
Use this screen to configure your device's name, domain name,
management inactivity timeout and password.
Time Setting
Use this screen to change your Device's time and date.
View Log
Use this screen to view the logs for the level that you selected.
Log Settings
Use this screen to change your Device's log settings.
Firmware
Use this screen to upload firmware to your device.
Configuration
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
Restart
This screen allows you to reboot the Device without turning the power off.
General
Use this screen to test the connections to other devices.
802.1ag
Use this screen to configure CFM (Connectivity Fault Management) MD
(maintenance domain) and MA (maintenance association), perform
connectivity tests and view test reports.
OAM Ping Test
This screen displays information to help you identify problems with the
DSL connection.
Chapter 3 Introducing the Web Configurator
Chapter 4 on page 71
for more
67
Advertisement
Table of Contents
Troubleshooting
