Traffic that does not match this class is assigned a priority queue based on the internal QoS
mapping table on the Device.
Your computer
IP=192.168.1.23
and/or
MAC=AA:FF:AA:FF:AA:FF
E-mail traffic: Highest priority
Click Advanced > QoS > General and enable QoS on the Device. Set your WAN Managed
1
Upstream Bandwidth to 10,000 kbps (or leave this blank to have the Device automatically
determine this figure). Click Apply.
Go to Advanced > QoS > Queue Setup. Click Add to create a new queue. In the screen that
2
opens, check Enable and enter or select the following values:
• Name: E-mail
• Outgoing Interface: WAN
• Priority: 1 (Highest)
• Weight: 8
P-870HNU-51b User's Guide
A colleague's computer
Other traffic: Automatic classifier
DSL
10,000 kbps
Chapter 2 Tutorials
43