Testing The Ddns Setting; How To Route Traffic To Another Network Using Static Route - ZyXEL Communications P870HNU-51B User Manual

Chapter 2 Tutorials
Enter the user name (UserName1 for example) and password (12345 for example).
2e
Click Apply.
2f

2.7.3 Testing the DDNS Setting

Now you should be able to access the Device from the Internet. To test this:
Open a web browser on the computer (using the IP address a.b.c.d) that is connected to the
1
Internet.
Type http://zyxelrouter.dyndns.org and press [Enter].
2
The Device's login page should appear. You can then log into the Device and manage it.
3
2.8 How to Route Traffic to Another Network Using Static
Route
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the Device's LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1
48
P-870HNU-51b User's Guide