If the upload was not successful, the following screen will appear. Click Tools > Configuration to
go back to the Configuration screen.
Figure 136 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 137 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Device.
Refer to
Section 1.6 on page 22
21.4 The Restart Screen
System restart allows you to reboot the Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the Device reboot. This does not
affect the Device's configuration.
Figure 138 Maintenance > Tools >Restart
P-870HNU-51b User's Guide
for more information on the RESET button.
Chapter 21 Tools
241