The Wps Station Screen - ZyXEL Communications P870HNU-51B User Manual

Chapter 7 Wireless LAN
Table 39 Network > Wireless LAN > WPS
LABEL
PIN Number
Generate
WPS Status
Release_Conf
iguration
Apply

7.6 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or
PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 48 Network > Wireless LAN > WPS Station
138
DESCRIPTION
This shows the PIN (Personal Identification Number) of the Device. Enter this PIN
in the configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this button to have the Device create a new PIN.
This displays Configured when the Device has connected to a wireless network
using WPS or Enable WPS is selected and wireless or wireless security settings
have been changed. The current wireless and wireless security settings also
appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless or
wireless security changes on the Device or you click Release_Configuration to
remove the configured wireless and wireless security settings.
This button is available when the WPS status is Configured but not configurable
if you disable WPS.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the Device.
Click Apply to save your changes back to the Device.
P-870HNU-51b User's Guide