ZyXEL Communications P870HNU-51B User Manual page 212

Chapter 17 Remote Management
Click Advanced > Remote MGMT to open the following screen. Use this screen to configure your
P-870HN to be managed by an ACS.
Figure 107 TR-069
The following table describes the fields in this screen.
Table 70 TR-069
LABEL
Inform
Inform Interval
ACS URL
ACS User Name
ACS Password
WAN Interface
used by TR-069
client
Display SOAP
messages on serial
console
Connection
Request
Authentication
Connection
Request User
Name
212
DESCRIPTION
Select Enable to activate remote management via TR-069 on the WAN.
Otherwise, select Disable.
Enter the time interval (in seconds) at which the Device sends information to
the auto-configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 user name for authentication with the auto-configuration
server.
Enter the TR-069 password for authentication with the auto-configuration
server.
Select a WAN interface through which the TR-069 traffic passes.
Select Enable to show the SOAP messages on the console.
Select this option to enable authentication when there is a connection request
from the ACS.
Enter the connection request user name.
When the ACS makes a connection request to the Device, this user name is
used to authenticate the ACS.
P-870HNU-51b User's Guide