14.1 Overview
Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing
information with other routers.
14.1.1 What You Can Do in this Chapter
The RIP screen lets you set up RIP settings on the Device
14.2 The RIP Screen
Click Advanced > RIP to open the RIP screen.
Figure 97 Advanced > RIP
The following table describes the labels in this screen.
Table 59 Advanced > RIP
LABEL
Interface
Version
P-870HNU-51b User's Guide
DESCRIPTION
This is the name of the interface in which the RIP setting is used.
The RIP version controls the format and the broadcasting method of the RIP
packets that the Device sends (it recognizes both formats when receiving). RIP
version 1 is universally supported but RIP version 2 carries more information. RIP
version 1 is probably adequate for most networks, unless you have an unusual
network topology.
(Section 14.2 on page
189).
14
RIP
189