ZyXEL Communications P870HNU-51B User Manual page 72

Chapter 4 Status Screens
Table 6 Status Screen
LABEL
Device
Information
User Name
Model Number This is the model name of your Device.
MAC Address
Firmware
Version
DSL Firmware
Version
WAN x
Information
Mode
IP Address
IP Subnet
Mask
Primary DNS
Secondary DNS
LAN Information
IP Address
IP Subnet
Mask
IPv6 Address/
Mask
IPv6 Scope
DHCP
WLAN
Information
Channel
WPS Status
AP 1 Information
ESSID
Status
72
DESCRIPTION
This field displays the Device system name. It is used for identification. Click this
to go to the screen where you can change it.
This is the MAC (Media Access Control) or Ethernet address unique to your
Device.
This field displays the current version of the firmware inside the Device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
This field displays the current version of the Device's DSL modem code.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the Device in the WAN.
This field displays the current subnet mask in the WAN.
This field displays the primary DNS server for the WAN.
This field displays the secondary DNS server for the WAN.
This field displays the current IP address of the Device in the LAN. Click this to
go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays the current IPv6 address and prefix length for the Device's
LAN interface. This field is available only when you enable IPv6 for the LAN
connection.
This field displays whether the IPv6 address is a link-local or global address. This
field is available only when you enable IPv6 for the LAN connection.
This field displays what DHCP services the Device is providing to the LAN.
Choices are:
Server - The Device is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
Relay - The Device acts as a surrogate DHCP server and relays DHCP requests
and responses between the remote server and the clients.
None - The Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
This is the channel number used by the Device now.
This field displays the status of WPS (Wi-Fi Protected Setup). Click this to go to
the screen where you can change it.
This is the descriptive name used to identify the Device in this wireless network.
Click this to go to the screen where you can change it.
This shows the current status of the wireless network.
P-870HNU-51b User's Guide