The Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 131 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Tools to go back to the
Firmware screen.
Figure 132 Error Message
21.3 The Configuration Screen
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears in this screen, as shown next.
Figure 133 Maintenance > Tools > Configuration
P-870HNU-51b User's Guide
Chapter 21 Tools
239