ZyXEL Communications P870HNU-51B User Manual page 66

Chapter 3 Introducing the Web Configurator
Table 5 Navigation Panel Summary
LINK
LAN
Wireless LAN
NAT
Security
Firewall
USB Services
File Sharing
Print Server
Media Server
Advanced
Static Route
RIP
QoS
Dynamic DNS
Remote MGMT
UPnP
Maintenance
66
TAB FUNCTION
Internet Use this screen to configure ISP parameters, WAN IP address assignment,
Connection and other advanced properties.
3G Backup Use this screen to configure the 3G WAN connection.
IP Use this screen to configure LAN TCP/IP, DHCP and IP alias settings.
DHCP Client List Use this screen to look at the IP addresses currently assigned to DHCP
clients and the IP addresses reserved for specific MAC addresses.
IPv6 Use this screen to specify LAN IPv6 settings.
General Use this screen to configure the wireless LAN settings, WLAN
authentication/security settings and MAC filtering rules.
WPS Use this screen to enable WPS (Wi-Fi Protected Setup) and view the WPS
status.
WPS Station Use this screen to use WPS to set up your wireless network.
Advanced Setup Use this screen to configure the advanced wireless LAN settings.
Port Forwarding Use this screen to make your local servers visible to the outside world.
DMZ Host Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to allow SIP sessions to pass through the Device.
General Use this screen to enable the firewall and configure the default policies.
Rules This screen shows a summary of the firewall rules, and allows you to add
or remove a firewall rule.
Share Use this screen to enable file sharing via the Device.
Configuration
Printer Use this screen to enable the print server on the Device and get the model
Configuration name of the associated printer.
Media Server Use this screen to use the Device as a media server.
Configuration
IP Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Use this screen to configure RIP (Routing Information Protocol) settings.
General Use this screen to enable QoS.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use this screen to configure QoS policers to limit the transmission rate of
incoming traffic.
Monitor Use this screen to view QoS packets statistics.
This screen allows you to use a static hostname alias for a dynamic IP
address.
TR069 Use this screen to configure the Device to be managed by an ACS (Auto
Configuration Server).
IP Address Use this screen to configure from which IP address(es) users can manage
the Device.
General Use this screen to turn UPnP on or off.
P-870HNU-51b User's Guide