REAR WHEEL AND BRAKE DISC
f. Tighten the rear axle holder with specified
g. Tighten the rear brake caliper bracket bolt
h. Install the rear brake caliper on the bracket
EAS00575
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
S After replacing the tire, wheel or both, the rear
wheel static balance should be adjusted.
S Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub installed.
1. Adjust:
S rear wheel static balance
6-15
torque.
Rear axle end nut
23 Nm (2.3 mSkg)
with specified tightening torque.
Brake caliper bracket bolt
40 Nm (4.0 mSkg)
and tighten the bolts with specified tightening
torque.
Brake caliper bolt
40 Nm (4.0 mSkg)
Refer to "FRONT WHEEL AND BRAKE
CISCS".
CHAS