Installing The Rear Brake Caliper - Yamaha XVS1100(L) Service Manual

1999 motorcycle
Hide thumbs Also See for XVS1100(L):
Table of Contents

Advertisement

FRONT AND REAR BRAKES
CAUTION:
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
4. Bleed:
S brake system
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
5. Check:
S brake fluid level
Below the minimum level mark a ! Add the
recommended brake fluid to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
6. Check:
S brake lever operation
Soft or spongy feeling ! Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00642

INSTALLING THE REAR BRAKE CALIPER

WARNING
S Before installaiton, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
S Never use solvents on internal brake com-
ponents as they will cause the piston seals
to swell and distort.
S Whenever a brake caliper is disassembled,
replace the brake caliper piston seals.
6-40
CHAS
Recommended brake fluid
DOT 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

1999 xvs11001999 xvs1100l

Table of Contents