Assembling The Rear Wheel; Adjusting The Rear Wheel Static Balance; Installing The Rear Wheel - Yamaha XT250X 2008 Service Manual

Rear wheel sprocket self-locking
nut
33 Nm (3.3 m•kg, 29 ft•lb)
NOTE:
Tighten the self-locking nuts in stages and in a
crisscross pattern.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS22140

ASSEMBLING THE REAR WHEEL

1. Install:
Wheel bearings
G
Oil seals
New
G
Refer to "ASSEMBLING THE FRONT
WHEEL" on page 4-5.
Spacer
G
EAS22150
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
After replacing the tire, wheel or both, the rear
G
wheel static balance should be adjusted.
Adjust the rear wheel static balance with the
G
brake disc and drive sprocket installed.
1. Adjust:
Rear wheel static balance
G
Refer to "ADJUSTING THE FRONT WHEEL
STATIC BALANCE" on page 4-5.
EAS22160

INSTALLING THE REAR WHEEL

1. Install:
Rear brake disc
G
Refer to "CHECKING THE REAR BRAKE
DISC" on page 4-29.
2. Lubricate:
Rear wheel axle
G
Oil seal lips
G
All manuals and user guides at all-guides.com
4-11
Recommended lubricant
Lithium-soap-based grease
3. Adjust:
Drive chain slack
G
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" on page 3-20.
Drive chain slack
40.0–45.0 mm (1.57–1.77 in)
4. Tighten:
Rear wheel axle nut
G
Rear wheel axle nut
85 Nm (8.5 m•kg, 62 ft•lb)
REAR WHEEL