Yamaha XVS1100(L) Service Manual page 253

FRONT FORK
2. Lubricate:
S inner tube's outer surface
Recommended lubricant
Yamaha fork and shock oil
10 W or equivalent
3. Tighten:
S damper rod bolt 1
NOTE:
While holding the damper rod with the T-handle
1 and damper rod holder 2 , tighten the damp-
er rod bolt 3 .
T-handle
90890-01326
Damper rod holder
90890-01460
4. Install:
S outer tube bushing 1
S seal spacer
(with the fork seal driver weight 2 and adapt-
er 3 )
Fork seal driver weight
90890-01367
Adapter
90890-01381
5. Install:
S oil seal 1
(with the fork seal driver weight and adapter)
CAUTION:
Make sure that the numbered side of the oil
seal faces up.
NOTE:
S Before installing the oil seal, apply lithium soap
base grease onto its lips.
6. Install:
S oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube groove.
6-49
CHAS
30 Nm (3.0 mSkg)