Yamaha XVS1100(L) Service Manual page 51

B Route the rear brake switch
lead under the master cylinder
reservoir hose.
C Position the band end of right
side bracket.
D Position the steel band end to
forward.
E Position the steel band end to
right side.
CABLE ROUTING
F Route the battery positive (+)
lead through the slit of the
battery box.
G Clamp the igniter unit lead to
the frame with a holder.
H To the rear fender.
I Route the fuel tank breather
hose under the fuel filter and
connect it (fuel tank side-roll
over valve side) with a joint.
Position the end of clip outside.
2-33
SPEC
J Fasten the wire harness with a
band on the tool box plate.
K Fasten the wire harness to the
frame with a plastic locking tie.
Position the locking tie front of
the solder.
E