Yamaha XVS1100(L) Service Manual page 316

ELECTRIC STARTING SYSTEM
5. Measure:
S brush length a
Out of specification ! Replace the brushes
as a set.
6. Measure:
S brush spring force
Out of specification ! Replace the brush
springs as a set.
7. Check:
S gear teeth
Damage/wear ! Replace the gear.
8. Check:
S oil seal
Damage/wear ! Replace the defective
part(-s).
EAS00772
Assembling the starter motor
1. Install:
S brush holder 1
NOTE:
Align the tab a on the brush holder with the slot
in the starter motor rear cover.
2. Install:
S starter motor yoke 1
S end bracket 2
S starter motor front cover 3
NOTE:
Align the projection a on the front cover with the
slot b on the end cover and starter motor yoke.
7-21
ELEC
Min. brush length
5 mm
Bruch spring force
7.65 X 10.01 N (780 X 1.020 g)