CLUTCH
EAS00281
CHECKING THE CLUTCH PLATES
The following procedure applies to all of the
clutch plates.
1. Check:
S clutch plate
Damage ! Replace the clutch plates as a
set.
2. Measure:
S clutch plate warpage
(with a surface plate and thickness gauge 1 )
Out of specification ! Replace the clutch
plates as a set.
Clutch plate warpage limit
Less than 0.1 mm
EAS00283
CHECKING THE CLUTCH SPRING AND
CLUTCH SPRING SEAT PLATE
1. Check:
S clutch spring plate
Damage ! Replace.
2. Check:
S clutch spring plate seat
Damage ! Replace.
3. Measure:
S clutch spring free height
Out of specificatrion ! Replace the clutch
spring
Clutch spring free height
7.2 mm
<Limit>: 6.5 mm
EAS00284
CHECKING THE CLUTCH HOUSING
1. Check:
S clutch housing dogs
Damage/pitting/wear ! Deburr the clutch
housing dogs or replace the clutch housing.
NOTE:
Pitting on the clutch housing dogs will cause er-
ratic clutch operation.
4-44
ENG