Yamaha XVS1100(L) Service Manual page 52

L Route wire harness outside of
the guide on the frame.
M Clamp the clutch cable and
starter cable with a holder.
Position the end of holder down
side.
N Route the throttle position
sensor lead and carburetor
heater lead left side of the
tappet cover.
O To the wire harness.
CABLE ROUTING
P Route the igniter lead through
the igniter plate hole to the wire
harness.
Q Clamp the taillight lead with
mud guard clamp.
R Clamp the taillight lead with a
holder on the mud guard.
2-34
E
SPEC