Yamaha XVS1100(L) Service Manual page 142

TIMING GEARS
Front cylinder
1. Install:
(Front cylinder)
S springs 1
S dowel pins
S timing drive gear 2
NOTE:
S Insert the suitable pin 3 into the hole of timing
chain drive gear sprocket and match the gear
teeth.
S Push the projections a on the timing drive
gear into the spaces b .
S Align the punch mark c on the timing drive
gear, the punch mark d on the timing chain
drive gear sprocket and the key posision e as
shown.
2. Install:
S claw washer
S lock washer 1
S primary drive gear nut 2
NOTE:
While holding the generator retor with the sheave
holder, tighten the primary drive gear nut.
3. Bend the lock washer tab along a flat side of
the nut.
Rear cylinder
NOTE:
When installing the rear cylinder timing gear, re-
peat the front cylinder timing gear installation
procedure. However, note the following points.
1. Install:
S springs
S dowel pins
S timing drive gear
S rotor assembly
Refer to "GENERATOR AND STARTER
CLUTCH".
4-37
ENG
New
110 Nm (11.0 mSkg)