Replacing The Rear Brake Pads - Yamaha XVS1100(L) Service Manual

FRONT AND REAR BRAKES
6. Check:
S brake fluid level
Below the minimum lever mark a ! Add the
recommended brake fluid to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
7. Check:
S brake lever operation
Soft or spongy feeling ! Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00583

REPLACING THE REAR BRAKE PADS

NOTE:
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
S brake hose holder 1
S brake caliper 2
2. Remove:
S brake pad cover
S brake pad clips
S brake pad pins
S brake pad spring
3. Remove:
S brake pads
(along with the brake pad shims)
4. Measure:
S brake pad wear limit a
Out of specification ! Replace the brake
pads as a set.
6-20
CHAS
Brake pad wear limit
0.5 mm