Ground Connections; Figure 42: Installing Cable Holders - Mellanox Technologies Switch-IB User Manual

Assemble the cable holders to the leaf-side rack using 14 M6X16 pan-head screws at 9Nm
Step 34.
torque
2.6

Ground Connections

Make sure to connect the ground post to a valid electrical ground. Use a grounding lug and a
ground wire of sufficient capacity to safely convey a potential discharge. The grounding post is
M-8 with 1.25mm pitch threads. A ground wire of AWG 6 or 4mm diameter is recommended for
Mellanox Technologies
(Figure 42).

Figure 42: Installing Cable Holders

Installation
59