Opening The Chassis Crate; Figure 5: Shock Stickers - Mellanox Technologies Switch-IB User Manual

2.4.2 Opening the Chassis Crate

Before starting the procedure, put the ESD strap on and connect it to a valid ground.
Step 1.
Unscrew and remove the top cover of the crate.
Step 2.
Unscrew and remove the sides of the crate.
Step 3.
Mellanox Technologies

Figure 5: Shock Stickers

It is highly recommended to have a screw gun or electric screwdriver for this step.
Installation
Unaffected stick-
ers
Triggered stick-
ers
26