InfiniBand FDR Switch Platform Hardware User Manual
1.10.6 Switch Shut-Down Procedures
To shut down the chassis run the following command twice (once for each MM):
Reload halt [noconfirm]
The first time you run the command it shuts down the master management module and
the second time shuts down the slave management module.
To shut down a leaf run the following command:
no power enable <module>
To shut down a spine run the following command:
no power enable <module>
To shut down a management module run the following command:
no power enable <module>
Mellanox Technologies
The chassis cannot be restarted remotely!
To restart the chassis you must physically go to the switch and unplug all of the
power cords to the chassis and then replug in all of the power cords to the chas-
sis.
52