Starting Circuit Cutoff System Operation - Yamaha XJR1300(L) 99 Service Manual

ELECTRIC STARTING SYSTEM
EAS00756
STARTING
OPERATION
If the engine stop switch is set to "
main switch is set to "ON" (both switches are
closed), the starter motor can only operate if at
least one of the following conditions is met:
S The transmission is in neutral (the neutral
S The clutch lever is pulled to the handlebar (the
The starting circuit cutoff relay prevents the
starter motor from operating when neither of
these conditions has been met. In this instance,
the starting circuit cutoff relay is open so current
cannot reach the starter motor. When at least
one of the above conditions has been met the
starting circuit cutoff relay is closed and the en-
gine can be started by pressing the start switch.
1 Battery
2 Main fuse
3 Main switch
4 Ignition fuse
5 Engine stop switch
6 Starting circuit cutoff relay
7 Diode
8 Clutch switch
9 Sidestand switch
10
11
12
13
7-14
CIRCUIT
switch is closed).
clutch switch is closed) and the sidestand is up
(the sidestand switch is closed).
WHEN THE TRANSMISSION IS IN
NEUTRAL
WHEN THE SIDESTAND IS UP AND
THE CLUTCH LEVER IS PULLED TO
THE HANDLEBAR
Neutral switch
Start switch
Starter relay
Starter motor
ELEC
CUTOFF SYSTEM
" and the