FRONT FORK
EAS00657
CHECKING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Check:
S inner tube 1
S outer tube 2
Bends/damage/scratches ! Replace.
WARNING
Do not attempt to straighten a bent inner
tube as this may dangerously weaken it.
2. Measure:
S spring free length a
Over the specified limit ! Replace.
Spring free length limit
395 mm
3. Check:
S damper rod 1
Damage/wear ! Replace.
Obstruction ! Blow out all of the oil pas-
sages with compressed air.
S oil flow stopper 2
Damage ! Replace.
CAUTION:
S The front fork leg has a built-in damper ad-
justing rod and a very sophisticated inter-
nal construction, which are particularly
sensitive to foreign material.
S When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
4. Check:
S cap bolt O-ring 1
Damage/wear ! Replace.
6-46
CHAS