TRANSMISSION
EAS00429
INSTALLING THE TRANSMISSION
1. Install:
S main axle assembly 1
S drive axle assembly 2
NOTE:
S Make sure that the drive axle bearing circlips
3 are inserted into the grooves 4 in the upper
crankcase.
S The drive axle bearing pin 5 must face to-
wards the rear of the crankcase and the main
axle bearing pin 6 must face towards the front
of the crankcase.
2. Check:
S transmission
Rough movement ! Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
4-88
ENG