Installing The Cylinder Head - Yamaha XJR1300(L) 99 Service Manual

CYLINDER HEAD
NOTE:
To ensure an even surface, rotate the cylinder
head several times.
EAS00232

INSTALLING THE CYLINDER HEAD

1. Install:
S gasket (New) 1
S dowel pins 2
2. Install:
S cylinder head
S washers
S copper washers
S cylinder head nuts
NOTE:
S Apply engine oil onto the threads of the cylin-
der head nuts.
S Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages.
Cylinder head Cap nut
35 Nm (3.5 mSkg)
Cylinder head nut
10 Nm (1.0 mSkg)
3. Install:
S exhaust camshaft
S intake camshaft
Refer to "INSTALLING THE CAMSHAFTS".
4-17
ENG