Installing The Carburetors; Measuring And Adjusting The Fuel Level - Yamaha XJR1300(L) 99 Service Manual

CARBURETORS
EAS00493

INSTALLING THE CARBURETORS

1. Adjust:
S carburetor synchronization
Refer to "SYNCHRONIZING THE CARBU-
RETORS" in chapter 3.
2. Adjust:
S engine idling speed
Engine idling speed
1,000 X 1,100 r/min
Refer to "ADJUSTING THE ENGINE IDLING
SPEED" in chapter 3.
3. Adjust:
S throttle cable free play
Throttle cable free play (at the
flange of the throttle grip)
3 X 5 mm
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
EAS00497
MEASURING AND ADJUSTING THE FUEL
LEVEL
1. Measure:
S fuel level a
Out of specification ! Adjust.
Fuel level (below the line on the
float chamber)
3.5 X 4.5 mm
a. Stand the motorcycle on a level surface.
b. Place the motorcycle on a suitable stand to
ensure that the motorcycle is standing
straight up.
c. Install the fuel level gauge 1 to the fuel drain
pipe 2 .
Fuel level gauge
90890-01312
d. Loosen the fuel drain screw 3 .
e. Hold the fuel level gauge vertically next to the
line on the float chamber
f. Measure the fuel level a .
NOTE:
Fuel level readings should be equal on both
sides of the carburetor assembly.
2. Adjust:
S fuel level
5-7
CARB