OIL PAN
EAS00378
INSTALLING THE OIL STRAINER
1. Install:
S oil strainer housing 1
Oil strainer housing bolt
10 Nm (1.0 mSkg)
LOCTITE
NOTE:
The arrow a on the oil strainer housing must
point towards the front of the engine.
2. Install:
S oil strainer cover 1
S relief valve 2
NOTE:
The arrow a on the oil strainer cover must point
towards the front of the engine.
EAS00380
INSTALLING THE OIL PAN
1. Install:
S dowel pins
S gasket (New)
S oil pan 1
S oil level switch 2
S engine oil drain bolt
WARNING
Always use new copper washers.
NOTE:
S Tighten the oil pan bolts in stages and in a
crisscross pattern.
S Lubricate the oil level switch's O-ring with en-
gine oil.
Oil pan bolt
10 Nm (1.0 mSkg)
Oil level switch bolt
10 Nm (1.0 mSkg)
4-62
ENG