Table of Contents
Advertisement
HANDLEBAR
EAS00666
REMOVING THE HANDLEBAR
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
S throttle cable housing 1
NOTE:
While removing the throttle cable housing, pull
back the rubber cover 2 .
3. Remove:
S handlebar grip (left) 1
NOTE:
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handlebar.
EAS00668
CHECKING THE HANDLEBAR
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
2. Check:
S handlebar 1
Bends/cracks/damage ! Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.
6-53
CHAS
Advertisement
Chapters
Table of Contents
Troubleshooting
