Checking And Lubricating The Cables; Lubricating The Levers And Pedals - Yamaha XJR1300(L) 99 Service Manual

CHECKING ANDLUBRICATING THE CABLES/LUBRICATING THE
LEVERS AND PEDALS LUBRICATING THE SIDE STAND/LUBRICATING
THE CENTERSTAND LUBRICATING THE REAR SUSPENSION
EAS00170

CHECKING AND LUBRICATING THE CABLES

The following procedure applies to all of the
cable sheaths and cables.
WARNING
Damaged cable sheaths may cause the
cable to corrode and interfere with its move-
ment. Replace damaged cable sheaths and
cables as soon as possible.
1. Check:
S cable sheath
Damage ! Replace.
2. Check:
S cable operation
Unsmooth operation ! Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
NOTE:
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubing device.
EAS00171

LUBRICATING THE LEVERS AND PEDALS

Lubricate the pivoting point and metal-to-metal
moving parts of the levers and pedals.
Recommended lubricant
Engine oil
EAS00172
LUBRICATING THE SIDESTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
Engine oil
EAS00173
LUBRICATING THE CENTERSTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the centerstand.
Recommended lubricant
Engine oil
EAS00174
LUBRICATING THE REAR SUSPENSION
Lubricate the pivoting point and metal-to-metal
moving parts of the rear suspension.
Recommended lubricant
Molydenum disulfide grease
3-40
CHK
ADJ