Yamaha XJR1300(L) 99 Service Manual page 50

H Fasten the seat lock cable to the
seat real with a plastic band.
Make sure that the end of band
down ward.
I Route the air filter case drain
hose over the starter motor to
right side of motorcycle.
J Position the clutch pipe parallel
with the oil filter cover.
CABLE ROUTING
K Fasten the sidestand switch lead
with steel clamp on the frame
and then route it between the
pickup cover, oil filter cover, AC
generator and starter motor to
the right side of motorcycle.
L Fasten the clutch hose with steel
clamp on the frame.
M Clamp the gromet on the clutch
hose with wire holder on the
frame.
2-30
SPEC
N Route the speedometer cable
through the guide.
O Touch the brake pipe to the bra-
ke caliper stopper.
P Touch the brake pipe to the bra-
ke hose joint.