Starting Circuit Cutoff System Operation - Yamaha TW125 1999 Service Manual

ELECTRIC STARTING SYSTEM
EAS00756
STARTING CIRCUIT CUTOFF SYSTEM OP-
ERATION
If the engine stop switch is set to "
main switch is set to "ON" (both switches are
closed), the starter motor can only operate if at
least one of the following conditions is met:
S The transmission is in neutral (the neutral
S The clutch lever is pulled to the handlebar (the
The neutral relay prevents the starter motor
from operating when neither of these conditions
has been met. In this instance, the neutral relay
is open so current cannot reach the starter mo-
tor. When at least one of the above conditions
has been met the neutral relay is closed and the
engine can be started by pressing the start
switch.
10
11
7-13
switch is closed).
clutch switch is closed) and the sidestand is up
(the sidestand switch is closed).
WHEN THE TRANSMISSION IS IN
NEUTRAL
WHEN THE SIDESTAND IS UP AND
THE CLUTCH LEVER IS PULLED TO
THE HANDLEBAR
1 Battery
2 Main fuse
3 Main switch
4 Engine stop switch
5 Neutral relay
6 Clutch switch
7 Sidestand switch
8 Neutral switch
9 Start switch
Starter relay
Starter motor
ELEC
" and the