Installing The Front Wheel - Yamaha XJR1300(L) 99 Service Manual

FRONT WHEEL AND BRAKE DISCS
6-6
EAS00544

INSTALLING THE FRONT WHEEL

The following procedure applies to both brake
discs.
1. Lubricate:
S wheel axle
S oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
S brake disc 1
NOTE:
S Apply LOCTITE
648 to the threads of the
brake disc bolts.
S Tighten the brake disc bolts in stages and in a
crisscross pattern.
3. Install:
S speedometer gear unit
NOTE:
Make sure that the speedometer gear unit and
the wheel hub are installed with the two projec-
tions a meshed into the two slots b respec-
tively.
4. Install:
S front wheel
NOTE:
Make sure that the slot a in the speedometer
gear unit fits over the stopper b on the outer
tube.
5. Tighten:
S wheel axle 1
S wheel axle pinch bolt 2
Wheel axle
73 Nm (7.3 mSkg)
Wheel axle pinch bolt
19 Nm (1.9 mSkg)
CAUTION:
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
CHAS