Setting Up The Displays; Choosing Display Type - Furuno RD-30 Operator's Manual

1. OPERATION
1.5

Setting up the Displays

Four display types are available: digital, graph, graphic, and highway. You may
freely select and arrange what data to display in the digital, graph and graphic
displays. The order in which displays are shown may also be changed. Note that
the highway display cannot be adjusted.
1.5.1

Choosing display type

1. Press the [MENU] key once (twice when Highway display is shown) to open
the main menu.
2. Use the cursor pad to select USER DISP and then press the [ENT] key.
Note: 1-5 show the currently selected display type.
3. Use the cursor pad to select display number desired and then press the
[ENT] key.
4. Select display type among DIGITAL, GRAPH, GRAPHIC, HIGHWAY and
OFF as appropriate and then press the [ENT] key.
5. For digital, graph and graphic follow one of the procedures on the next
several pages to choose the data to display.
1-8
MAIN MENU
USER DISP SYS SETUP
ALARM1 I/O SETUP
ALARM2 TD SETUP
MESSAGES LANGUAGE
RESET UNITS
OFFSETS HDG SETUP
USER DISPLAY SETUP
1: DIGITAL
2: DIGITAL
3: DIGITAL
4: DIGITAL
5: DIGITAL
User display setup menu
DIGITAL
GRAPH
GRAPHIC
HIGHWAY
#1 display
User display options
Accessible only when
heading sensor PG-1000
or C-2000 is used.
Main menu
DIGITAL
GRAPH
GRAPHIC
HIGHWAY
OFF
#2-#5 displays