Port-Mirroring Commands; Switch 9100 Port-Mirroring Example - 3Com 9100 User Manual

Port-Mirroring
Commands
Table 17 Switch 9100 Port-Mirroring Configuration Commands
Command
enable mirroring to <port>
config mirroring add [mac
<mac_address> | vlan <name> |
port <port> | vlan <name> port
<port>]
config mirroring delete [mac
<mac_address> | vlan <name> |
port <port> | vlan <name> port
<port> | all}
disable mirroring
show mirroring
Switch 9100
Port-Mirroring
Example
Switch 9100 port-mirroring commands are described in
Description
Dedicates a port to be the mirror output port.
Adds a single mirroring filter definition. Up to eight
mirroring definitions can be added. You can mirror
traffic from a MAC address, a VLAN, a physical port, or
a specific VLAN/port combination.
Deletes a particular mirroring filter definition, or all
mirroring filter definitions.
Disables port-mirroring.
Displays the port-mirroring configuration.
The following example selects port 3 as the mirror port, and sends all
traffic coming into or out of the switch on port 1 to the mirror port:
enable mirroring port 3
config mirroring add port 1
The following example sends all traffic coming into or out of the switch
on port 1 and the VLAN default to the mirror port:
config mirroring add port 1 vlan default
Switch 9100 Port-Mirroring
Table 17.
61