Second Cpu Air Flow Duct (Model H50); Removal; Replacement - IBM H Series Installation And Service Manual

Second CPU Air Flow Duct (Model H50)

Removal

1. Follow the steps in "Rear Service Position" on page 7-28.
2. Carefully lift the air flow duct up and away from the first CPU card if it has a
second processor. If the CPU card has only one processor, this air duct is not
required.
3. Carefully lift the second air flow duct up and away from the second CPU card if it
has a second processor.

Replacement

Replace in reverse order.
7-38
RS/6000 Enterprise Server Model H Series Installation and Service Guide