IBM H Series Installation And Service Manual page 169

Table 3-8 (Page 10 of 10). Firmware Checkpoints.
Checkpoint Description
E213 Initial memory configuration
E214, E218 Memory test
E216 Copy ROS into RAM. Setup Trans-
lation and C environment
E220 Final memory configuration
E297 Start firmware softload path exe-
cution.
E298 Start firmware recovery path exe-
cution.
E299 Start C code execution
E3xx Memory test
E440 Validate NVRAM, initialize partitions
as needed
E441 Generate /options node NVRAM
configuration variable properties
E442 Validate NVRAM partitions
E443 Generate NVRAM configuration var-
iable dictionary words
Action/
Possible Failing FRU
Go to "MAP 1240: Memory Problem
Resolution" on page 2-10.
Go to "MAP 1240: Memory Problem
Resolution" on page 2-10.
Replace the memory card (See
notes on 3-1.) See the note on
3-45.
Go to "MAP 1240: Memory Problem
Resolution" on page 2-10.
See the note on 3-45.
See the note on 3-45.
See the note on 3-45.
Go to "MAP 1240: Memory Problem
Resolution" on page 2-10.
1. Verify that the system and
service processor firmware
levels are at the current release
levels, update as necessary.
2. Replace the memory card (See
notes on 3-1.) See the note on
3-45.
1. Verify that the system and
service processor firmware
levels are at the current release
levels, update as necessary.
2. Replace the memory card (See
notes on 3-1.) See the note on
3-45.
1. Verify that the system and
service processor firmware
levels are at the current release
levels, update as necessary.
2. Replace the memory card (See
notes on 3-1.) See the note on
3-45.
Suspect a system firmware problem
if this problem persists. Verify that
the system firmware is at the
current release level, update as
necessary. See the note on 3-45.
Chapter 3. Error Code to FRU Index
3-61