Replacement - IBM H Series Installation And Service Manual

Replacement

Note: Memory modules must be installed in identical pairs (size and speed). They
may be replaced individually, provided the replacement module is identical in size
and speed.
1. With one hand, touch any metal surface of the chassis to minimize static elec-
trical charges, and then pick up a memory module and locate the desired
memory module connector on the memory card.
2. Install the new memory module by pushing down on the memory module until
the locking tabs lock it into the connector. (Do not move the locking tabs your-
self. They lock automatically when you fully insert the module.)
Attention: Inserting the memory module crooked could damage the memory
module.
3. Store any memory modules you are no longer using in a static-protective
package. Label the package for size and speed.
4. Carefully place the memory card into the card guide rails.
7-36
RS/6000 Enterprise Server Model H Series Installation and Service Guide