Fan Monitor Control Card; Removal - IBM H Series Installation And Service Manual

Fan Monitor Control Card

Removal

1. Place the drawer in the rear service position, as described in "Rear Service
Position" on page 7-28.
2. Disconnect the cables from the fan monitor control (FMC) card, noting the
locations. Label if necessary.
1
1 System Board
3 I/O Board
3. Remove the screws that hold the FMC card and lift the card out.
H50
2
3
2
Chapter 7. Removal and Replacement Procedures
1
2
FMC Card
H70
3
7-33