14. Disconnect the diskette drive cable from the diskette drive connector J13 on the
I/O board.
15. Plug in the power cable and wait for OK on the operator panel display.
16. Turn the power on.
Does the system stop with code E1F2, E1F3, STBY, 20EE000B or 4BA00830
displayed on the operator panel?
NO
Go to "Step 1540-3" on page 2-41.
YES
If a second processor card was removed go to "Step 1540-4" on
page 2-42.
If the system has only one processor card go to "Step 1540-5" on
page 2-43.
2-40
RS/6000 Enterprise Server Model H Series Installation and Service Guide