IBM H Series Installation And Service Manual page 412

Enterprise server
Table of Contents

Advertisement

expect "16\r" or "15\r" or "14\r" or "12\r" or "1 \r" or "5\r" or "1\r" busy "7\r"
timeout 6
done
disconnect:
delay 2
send "+++"
delay 2
send "ATH T\r"
ignore " \r" or "OK\r" timeout 2
send "ATE Q1\r"
ignore " \r" timeout 1
done
condin:
send "ATZ Q T\r"
ignore " \r" or "OK\r\n" timeout 2 # Ignore modem response.
send "ATE T\r"
expect " \r" or "OK\r\n" timeout 2 # Enable responses (Numeric),
send "ATQ V X T\r"
expect " \r" timeout 2
send "ATS =2\r"
expect " \r" timeout 2
done
waitcall: ignore "2\r" timeout 1
expect "2\r" timeout 1
expect "16\r" or "15\r" or "14\r" or "12\r" or "1 \r" or "5\r" or "1\r"
timeout 6
done
page:
send "ATDT%N,,,,%R;\r"
expect " \r" timeout 6
delay 2
send "ATH T\r"
expect " \r" timeout 2
done
ripo:
send "ATZ Q T\r"
ignore " \r" or "OK\r\n" timeout 2 # Ignore modem response.
send "ATE T\r"
expect " \r" or "OK\r\n" timeout 2 # Enable responses (Numeric),
send "ATQ V X T\r"
expect " \r" timeout 2
send "ATS = \r"
expect " \r" timeout 2
done
error:
expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r"
delay 2
done
E-18
RS/6000 Enterprise Server Model H Series Installation and Service Guide
# Separate from previous data.
# Assure command mode.
# Allow mode switching delay.
# Set modem switch-hook down
# (i.e., hang up).
# Ignore modem response.
# Initialize modem: Echo OFF,
# Disable responses.
# Reset modem. Select profile
# Initialize modem: Echo OFF,
# Limit response codes.
# Confirm commands successful.
# Set AutoAnswer ON
# Confirm command successful.
# Ignore first ring.
# Pick up second ring
# or timeout.
# Expect a connection response.
# %N = pager call center number
# Add enough commas to wait for
# time to enter paging number.
# %R = paging number
# Confirm successful command.
# Wait before hanging up.
# Hang up.
# Confirm successful command.
# Reset modem. Select profile
# Initialize modem: Echo OFF,
# Limit response codes.
# Confirm commands successful.
# Set AutoAnswer OFF
# Confirm command successful.
# RI Power On enabled.
# Handle unexpected modem
# responses.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs/6000 h seriesRs/6000 h50Rs/6000 h70

Table of Contents