Checkpoints - IBM H Series Installation And Service Manual

Table 3-5 (Page 2 of 2). Bus SRN to FRU Reference Table (Model H70 only)
SRN Bus Identifica-
tion
9CC-101 PCI Bus 01
9CC-102 PCI Bus 02
9CC-103 PCI Bus 03
651-730 ISA Bus

Checkpoints

Checkpoints are intended to let users and service personal know what the server is
doing, with some detail, as it initializes. These checkpoints are not intended to be
error indicators, but in some cases a server could hang at one of the checkpoints
without displaying an 8-character error code. It is for these hang conditions, only, that
any action should be taken with respect to checkpoints. The most appropriate action
is included with each checkpoint.
Before taking actions listed with a checkpoint, it is a good idea to look for better
symptoms in the Service Processor error log. See "System Information Menu for
Model H50" on page C-13 or "System Information Menu for Model H50" on
page C-13.
3-44
RS/6000 Enterprise Server Model H Series Installation and Service Guide
Possible Failing Device and AIX
Location Code
Device installed in I/O Slot 1P (20-58
to 20-5F)
Device installed in I/O Slot 2P (20-60
to 20-67)
Internal/External SCSI port 2 (10-88)
Device installed in I/O Slot 7P (30-68
to 30-6F)
Device installed in I/O Slot 8P (30-70
to 30-77)
Device installed in I/O Slot 5P (40-58
to 40-5F)
Device installed in I/O Slot 6P (40-60
to 40-67)
Diskette Drive port/device
(01-D1-00-00)
Parallel port/device (01-R1)
Serial ports (1-3)/device (01-S1 to
01-S3)
Mouse port/device (01-K1-01-00)
Keyboard port/device (01-K1-00-00)
Device installed in I/O Slot 8I (01-01
or 01-02)
Device installed in I/O Slot 9I (01-01
or 01-02)
Associated
FRU
Adapter
Adapter
I/O board. (See
notes on 3-1.)
Adapter
Adapter
Adapter
Adapter
I/O board. (See
notes on 3-1.)
I/O board. (See
notes on 3-1.)
I/O board. (See
notes on 3-1.)
I/O board. (See
notes on 3-1.)
I/O board. (See
notes on 3-1.)
Adapter
Adapter